| Porsche 924S/944/968 Miscellaneous - Page 6 |
Jack Plate (Lock Type) |
| Most newer cars have specific areas in the chassis designed for safely lifting the vehicle. These jack points require a pinned adapter that professional technicians use with their hydraulic car lifts. This jack pad locks into the the car by simply turning the unit and is specifically designed to be used with most floor style hydraulic jacks. Its low profile design gives your jack sufficient clearance to slide under the car and then safely lifts it to minimize potential slippage. Come's with a rubber top pad to eliminate the undercoating of your car from being damaged. If you are using these pads with a car lift, you will need (4) units to properly lift the vehicle. All steel construction, water jet and tig welded seams with a durable powder-coated red finish. |
|
REN-T02-POR | Rennline Jack Plate (Lock Type), each, 924S/944 (1985.5-95) [More Info] | $35.00 |  |
Rennline Race/Tow Hooks  |
| Rennline Screw-on Race Hooks |
| Rennline's screw-on race tow hooks install in minutes on any Porsche with factory screw type removable tow hooks. Designed to screw directly into the factory bumper pull location. These pulls are a 2 piece design allowing you to mount them close to the factory bumper cover without the worry of scratching your paint while screwing them on. Keep the corner workers and track officials happy by installing a set of hooks that are highly visible and work. |
|
REN-E05-08 | Rennline Race Hook, Front - Screw Type, Red, each, 944 Turbo/968 all [More Info] | $89.95 | |
| Folding Race Hook - Screw Type |
| Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike aluminum units, Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. |
|
REN-E13-08 | Rennline Folding Race Hook - Screw Type, Red, each, FRONT: 944 Turbo/968 all [More Info] | $95.00 | |
| Retractable Tow Hook |
| A majority of newer factory built race cars feature retractable tow hooks, and now Rennline has engineered a tow hook for your custom race car that offers the same advantages. These retractable tow hooks are available as bolt on units for any corner of your 964/993 with fiberglass bumpers, or when used with our universal mounting brackets, these hooks can be mounted in many different configurations based on your specific needs. Made from powder-coated steel with a spring-loaded retractable hook and comes with (2) tow stickers. Your shins will thank you. |
|
REN-E68 | Rennline Retractable Tow Hook, FRONT - 944 all [More Info] | $125.00 | |
| Rennline Universal Race Tow Hooks |
| Rennline's Universal Race Tow Hooks have been specifically designed for those of you who have a custom built race car that will not accept a "Bolt On" style race hook. They are available in 4 different lengths and come with (2) 90 degree brackets to aid in a smooth installation. Made of steel and powder-coated red. Each kit comes with (2) "TOW" stickers and mounting hardware. |
|
REN-E01X-5 | Rennline Race Hook, Front (universal) - 5 in., Red, each [More Info] | $51.95 | |
REN-E01X-6 | Rennline Race Hook, Front (universal) - 6 in., Red, each [More Info] | $51.95 | |
REN-E01X-7 | Rennline Race Hook, Front (universal) - 7 in., Red, each [More Info] | $51.95 | |
REN-E01X-8 | Rennline Race Hook, Front (universal) - 8 in., Red, each [More Info] | $51.95 | |
REN-E01-R-12 | Rennline Race Hook, Front (universal) - 9-12 in. (Adjustable), Red, each [More Info] | $55.95 | |
Custom Service Cover |
| These durable covers are made from 25 oz., double stitched, 100% virgin vinyl and lined with an Extra thick, super soft, porous flannel backing to protect your paint from dents and abrasions. The cover is felt bound around the edges and hand tailored for maximum fit and strength. A handy pocket is conveniently sewn into the cover to hold your tools for quick access. All covers come with a 5 Year Limited Warranty, the Best in the industry, against manufacturers defects. Please allow 2-3 weeks for delivery. |
|
| PEL-COLSC003 | Custom Front Service Cover (3pc), 924/944/944 Turbo All (1977-92), Each [More Info] | $90.65 | |
951MAX Performance Chips |
| What sets the 951MAX Performance Chips apart? Testing and research done first hand by developer Russell Berry, specifically for the 1986-89 Porsche 944 Turbo and Turbo S DME/KLR. 951MAX claims that you can crank the boost up to 25PSI and not blow your engine! On track, users ran 22-24PSI, off track the boost was dialed down to 18PSI and kept there. With this configuration, optimum performance is obtained through all ranges right up to 7000RPM (rev limiter moved to 7000 RPM on these chips) No stumbling, no surging, no coughing! Smooth power from zero to full throttle! Dyno-proven power increase, flatter torque curve, and quicker spoolup. Click here to see dyno charts
Improved drivability, power, and efficiency
Unprecedented customer support
Boost levels from 15-24PSI
Rev limiter increased to 7000 RPM
Custom chip tuning available
Specific configurations available to more closely match your car's requirements
30 Day money back guarantee |
|
| PEL-24V4R7K | 951MAX Performance Chip, 944 Turbo (1986-87) 24 pin DME K26/6 [More Info] | $299.00 | |
| PEL-28V4R7K | 951MAX Performance Chip, 944 Turbo non-S (1988) 28 pin DME K26/6 [More Info] | $299.00 | |
| PEL-28SV4R7K | 951MAX Performance Chip, 944 Turbo S (1988-89) 28 pin DME K26/8 [More Info] | $299.00 | |
